Dimensions: 1.5″ x 18″ Blast Tube Capacity: 60-90g
This product comes with an ice jacket which enables you to use either dry ice (orderable online) or crushed ice.
BHO Hardware’s exclusive range of stainless steel extractor systems are manufactured from 304 grade stainless steel and are ideal for extracting essential health oils such as lavender and rose. The system enables the user to develop solvent pressure by closing the valve at the base and packing the extractor, before soaking the material and releasing the solvent and the essential oil via the bottom valve.
What makes our products stand out
– All BHO Hardware units are 304 grade stainless steel
– Welded ball valves (no PTFE tape = no gas leaks)
– MB valves on all lids as standard (controlled and safe flow of gas)
– 4 prong stand / quadpod as standard to provide more stability
– 2 tri clamps provided with each unit
– 2 year warranty with BHO Hardware – excludes gaskets and screens
– Assembled in the UK on a BHO Hardware site
The lid comes standard with an MB valve and the bottom of each tube comes with a 304 grade stainless steel ¼ inch ball valve. The benefits of this are twofold, it enables you to vacuum the BHO tube out with a vacuum pump leaving no moisture or oxygen in the tube itself. When you administer the butane the gas will pass into the tube much quicker and it is also safer as there is no oxygen to react with the butane.
You can also let your products saturate in the cold gas held in the tube as you can close the ball valve at the bottom allowing the gas to soak your product. As the MB valve only allows gas to go in one direction you’re safe in the knowledge that the gas has nowhere to go and so makes it a safer process. We have developed this method and found we often achieve greater yields and a higher quality end product. As we provide the 4 stabilising legs the unit can stand up by itself so you don’t have to physically touch the freezing tube during the process of administering the gas. This makes the whole operation more comfortable and user friendly.
– End cap with m5 thread hole and MB valve
– 1.5″ x 18″ Blast Tube Kit with Dry Ice Jacket (60-90gr)
– ¼” MBSP welded ball valve
– 1 x hose tail connector
– 4 prong stabilising legs with rubber feet
– 2 x 1.5” heavy duty tri clamps
– 2 x 1.5” PTFE gaskets
– Free bottle of Premium Isopropyl Alcohol (IPA) 99.9% for cleaning the components
– Free 420ml of Whip-It! Premium, zero impurity butane (UK dispatch only)
– Free roll of blast paper to extract directly onto
We also manufacture a range of custom closed column blast tubes and closed loop extractors. Please contact us for more information.
- Using dry ice instead of crushed will get the product much colder.
- When packing the tube try to compress the product, this will help saturate all the product when you come to administer the butane.
- Vacuuming the tube after you’ve packed the product helps remove any unwanted moisture and oxygen. The vacuum will enable faster filling of butane.
- Freezing the vacuumed tube for a minimum of 2 hours before administering the butane
will mean you don’t pull as much chlorophyll out of the product so it will improve clarity and increase yield.
- Never put butane filled tubes in the freezer
- Always use in extremely well ventilated OUTDOOR areas